Products

The lightweight REVERSO is a multi-functional belay/rappel device designed for cragging, multi-pitch climbing and mountaineering. Reverso mode provides assisted-braking while belaying one or two seconding climbers from the top of a pitch. It accommodates most rope diameters: single rope 8.5 to 10.5 mm, half ropes 7.1 to 9.2 mm and twin ropes 6.9 to 9.2 mm. The specific design of the rope slots allows the rope to glide smoothly and reduces wear. Multipurpose and easy to use:- classic belay technique with both hands on the rope- ropes glide smoothly through the device- can be used for rappels- Reverso mode for belaying one or two seconds; commonly used on multi-pitch climbs- independent and simultaneous belaying of two seconds in Reverso mode- while belaying in Reverso mode, a carabiner placed in the release hole allows the belayer to give slack when the device is under tension- rope installation diagrams for belaying and Reverso mode are engraved on the device Adapted to a broad range of rope diameters:- V-shaped friction grooves enable controlled braking- compatible with dynamic single ropes 8.5 to 10.5 mm (11 mm possible, depending on the rope's suppleness)- compatible with dynamic half ropes 7.1 to 9.2 mm- compatible with dynamic twin ropes 6.9 to 9.2 mm Durable and lightweight:- the rounded design of the rope slots limits wear and extends the life of the device- compact and lightweight: only 57 g Certification(s): EN 15151-2, UIAA

Set of 4 easy to use silicone cups that are perfect for at home and professional cupping. Cupping has been used for centuries in Asia for health and wellness, and continues to gain popularity around the world due to its benefits. These cups be used for traditional cupping, dynamic cupping and cupping for mobility. Simply suction in place then pull, push, and glide the cups to break up fascial adhesions. Use the cups to improve flexibility and to decrease myofascial restriction. Use with lubricant/lotion for best suction. 2 small and 2 large food-grade silicone cups in a convenient carrying case. SPECIFICATIONS Diameter: Small cups are 2.2 inch Large cups are 2.6 inch

The SIROCCO is designed to respond to the needs of climbers and mountaineers for reduced weight and for protection. Its head-covering shape, lower in the rear, offers reinforced protection. Optimized volume on the head, along with excellent ventilation, provide maximum comfort. Ultra-light design: only 170 g hybrid construction with a shell in EPP (expanded polypropylene) foam and rigid crown injected with EPS (expanded polystyrene) foam. Head-covering design for optimal protection against lateral and rear impact. Maximum comfort in action: wide holes, for excellent ventilation. completely adjustable, thanks to the adjustable headband and chinstrap. magnetic buckle facilitates fastening the chinstrap (Petzl patent). compatible with the VIZION eye shield. two hooks and rear elastic for attaching a headlamp. It comes with a protective storage bag and spare foam.

For skilled climbers and mountaineers! SITTA is lightweight without compromising comfort. It's also very compact when stored in your backpack. The extremely thin and flexible waistbelt keeps your movement completely unhindered, whether you’re rock climbing or mountaineering. Four gear loops allow you to carry all the gear you need to climb rock or ice. With this harness, you can power through multi-day excursions: the reinforced tie-in points are designed to provide long-lasting resistance to rope friction. Remarkably lightweight, mobile, and comfortable: Extremely thin and flexible waistbelt and leg loops with WIREFRAME Technology: HMPE (high-modulus polyethylene) strands used in the waistbelt and leg loops provide optimal load distribution without the use of foam and the extreme lightness and comfort of the harness make it practically unnoticeable when worn Very compact, freeing up room in your pack The elasticized fixed leg loops and supple leg loop bridge give you total freedom of movement Waistbelt equipped with a DOUBLEBACK HD buckle in forged aluminum, offering good grip and fluid glide of the webbing for easy and quick adjustment Capacity to carry a large quantity of gear: Two very large, rigid equipment loops in front for racking a lot of gear and to easily clip and unclip tools; mobile separators optimize organization and quick access to quickdraws, nuts, and other gear Two flexible rear gear loops, angled to bring gear to the front and comfortable when carrying a backpack Two slots for CARITOOL tool holder Rear loop for trail line or for carrying belay station gear Enhanced durability: Bonded construction in the waistbelt avoids pressure points and provides optimal wear resistance The lack of through stitching eliminates chafe and friction zones in the waistbelt Durable, abrasion-resistant exterior fabric Reinforced tie-in points in high-modulus polyethylene (HMPE) for improved resistance to wear from rope friction

Sm’D is a D-shaped locking carabiner that is lightweight and compact and can be used in numerous situations; it is easy to manipulate, even when wearing gloves, and is available in three locking system versions. Great versatility:- D shape is functional regardless of orientation, meeting multiple uses: attachment of a belay system, a pulley, or on the end of a lanyard...- Compact and very lightweight Good handling and ergonomics:- D shape for good handling- H-shaped cross-section contributes to better grip when wearing gloves- Keylock system, to avoid any involuntary snagging of the carabiner- Hole allows a TIBLOC or a MICRO TRAXION to be connected to the carabiner with a cord, making these devices loss-proof TWIST-LOCK: specific use when quick opening is key (e.g. at the end of a lanyard) and when connecting a GRIGRI to the harness

Intuitive belay device with reliable blocking of the climbing rope. The first generation of the Smart belay device was successfully launched in 2009. Built on the experience the new Smart 2.0 offers significantly improved braking effectiveness as well as optimized geometry and intuitive handling. The newly developed brake insert blocks the rope in the event of a fall. The belaying action of the Smart 2.0 is the same as the previous model and is therefore tailored to the belayer's reflex movements. The lightweight 80 grams Smart 2.0 is easy to operate and has no moving parts or levers. As it operates according to the tube principle, the Smart 2.0 is therefore suitable for both lead climbing and top rope climbing. In the event of a fall, the Smart 2.0 blocks the climbing rope, with the newly developed high-performance brake insert interacting with the belay carabiner. It therefore offers the belayer optimal support and significantly improved safety. Mammut recommends use of the Smart HMS for the Smart 2.0. It is suitable for rope diameters from 8.7 to 10.5 mm. SPECIFICATIONS: Weight [g]: 80

The Wave Tool is designed by 2 Physical Therapists with decades of treating climbing and mountain guiding injuries. This is the most effective all-in-one tool for treating myofascial restrictions, adhesions, scar tissue, neural restriction, and muscle tension. WHY CHOOSE THE WAVE TOOL? VERSATILITY - The Wave Tool is the ultimate soft tissue release tool. This all in one tool combines myofascial massage surfaces and IASTM edge technology to completely treat myofascial pain, fascial restrictions and adhesions. No other tool combines edge technology and massage features in one tool. PERFORMANCE - The wave tool has the optimal steepness of curvature in it’s IASTM edges. This equates to more precise adhesion release. The combination of edge, massage and trigger point features allows the user to achieve better results during treatment. FEEL - Most IASTM tools on the market are two dimensional. This design is simpler to make, but the downside is that it is hard to feel the tissue restrictions and necessitates a firm grip on the tool. The Wave Tool feels warmer on the skin, and the 3-D ergonomic grips allow the user to hold the tool with a light comfortable hold, while gaining surface area and sensitivity. This enables the user to feel tissue restrictions and variations with ease, and to deliver superior treatment. AFFORDABILITY - The Wave Tool is significantly more affordable than most IASTM tools on the market. DURABILITY - Resistant to scratches and dings. Will not break. In fact, the more you love your Wave Tool, the more it will polish like stone, and love you back Featured in: Rock and Ice Magazine, Gripped Magazine, Climbing Magazine, Outside Magazine and Elevation Outdoors Magazine. TIPS FOR SELF-TREATMENT Ample practice time will help you acclimate to this versatile tool. The more you use the Wave Tool, the more natural it will feel to use. Utilization of the videos, photos, and instructional resources will enhance your effectiveness with the tool. Use the tool on your hand, forearm and thigh to familiarize yourself with various pressures, grips, and surfaces. Always use lotion on bare skin, or use in the shower, or over clothing. Some mild redness can be expected. It is always a good idea to seek professional evaluation on your medical condition and education on edge and wavetool use for your particular injury.

Yates Gear Speed Wall Ladders are designed with the same configuration as the Big Wall Ladders but have 1" wide steps to reduce bulk and weight. Smaller diameter spreader bar Speed Wall Ladders compliment Yates Big Wall Ladders to use as a third or fourth ladder set Built in spreader bar ensures that steps remain open without causing foot pinching6 Step Speed Wall Ladder measures 70 in. Color Various - Black sides and Red or Green steps Size 6 Step - 6 Step Speed Wall Ladder measures 66"

These aid hooks are an essential piece of equipment in your aid rack. They can be used as bat hooks, in drilled placements, or on "dead heads". They are stable and strong for edges and micro ledges. Details: Made of 4130 Chromoly Steel for extra strength and durability Specifications: Working Load: Body Weight Reach: #1 (14mm/0.6") #2 (12mm/0.5") #3 (30mm/1.2") Thickness: 3.0mm/0.12" Weight: #1 (26g/0.9oz) #2 (46g/1.6oz) #3 (42g/1.4oz)

A lightweight workhorse ideal for every climber and discipline. The Quest is perfect for people looking for the ideal balance of weight and durability. Plus, its smooth sheath reduces gear drag while its mid-9 mm diameter keeps things light. The Quest is the perfect rope to pack for new adventures and trips back to old favorites. UIAA Dry certified built with Sterling XEROS technology Made with bluesign® certified raw materials

Updated for touchscreen compatibility, the StormTracker Sensor Gloves are equally at home alpine climbing, ski touring or ice climbing. Low-profile GORE® WINDSTOPPER®. Soft Shell fabric deflects biting gusts, and a tricot lining retains valuable heat. The streamlined profile allows for amazing breathability, unprecedented dexterity and extraordinary tactility. Touch-Screen Compatible Pull-On Loop Glove Clip Undercuff Construction Elasticized Wrist Tapered Wrist Zippered Gauntlet Gusseted Wrist Entry Fabric Performance Water Resistant Breathable Windproof Ultra-Tactile Lightweight Wicking Quick Drying Soft and Tactile Leather Palm MATERIALS Fabric: GORE-TEX INFINIUM™ with WINDSTOPPER soft shell, 94% nylon, 6% spandex face fabric with 100% polyester backer, Water Resistant goat leather palm, Touchscreen-Compatible Leather 100% Tricot Lining

Updated for touchscreen compatibility, the StormTracker Sensor Gloves are equally at home alpine climbing, ski touring or ice climbing. Low-profile GORE® WINDSTOPPER®. Soft Shell fabric deflects biting gusts, and a tricot lining retains valuable heat. The streamlined profile allows for amazing breathability, unprecedented dexterity and extraordinary tactility. Touch-Screen Compatible Pull-On Loop Glove Clip Undercuff Construction Elasticized Wrist Tapered Wrist Zippered Gauntlet Gusseted Wrist Entry Fabric Performance Water Resistant Breathable Windproof Ultra-Tactile Lightweight Wicking Quick Drying Soft and Tactile Leather Palm MATERIALS Face Fabric: GORE-TEX INFINIUM™ with WINDSTOPPER: 94% nylon, 6% spandex face fabric with 100% polyester backer Palm and fingers: Water Resistant goat leather palm, Touchscreen Leather Lining: 100% Tricot

These super-comfortable, symmetric edges are available in 3 levels of incut (0°, 15°, 30°) and 3 thicknesses (20 mm, 25 mm, 30 mm). Hardware included Sold as 6 packs

Comfortable pinches that taper from top to bottom to accommodate all hand sizes. 70mm depth with 0 degree incut. Hardware included Sold as 6 packs

A go-to glove in milder temperatures for ice climbing, mixed routes and drytooling, the Terminator has climbing specific features, 4-way stretch and our highest level of dexterity with full waterproof protection for sending. 100% waterproof BD.dry™ insert 40 g Thinsulate® Insulation at back of hand Goat leather palm for durability and grip Fixed fleece lining Seamless Pinky Construction Abrasion resistant TPU knuckle patch 4-way stretch shell Goatskin suede nose wipe