Petzl

The VOLTA GUIDE 9 mm rope is extremely lightweight and compact for ultimate rock climbing performance, and offers flexibility and comprehensive water repellent treatment for mountaineering. The UIAA Guide Dry water repellent treatment gives it excellent water resistance and is well-suited to everyday use in extreme conditions. Certified for all uses: single, half or twin, for multiple uses and maximum versatility according to the terrain. Thin, ultra-light and compact rope for intensive mountaineering: for use in rock, mixed, snow or ice environments multi-type for use as a single, half or twin rope Excellent water resistance: UIAA Guide Dry treatment: complete water-repellent treatment, making the rope more resistant to water, dirt and abrasion meets the requirements of the UIAA standard Water repellent test: water absorption of less than 2 % the rope is especially suitable for intensive or everyday use in extreme conditions Convenient rope handling: Middle Mark: indicates the middle of the rope to facilitate maneuvers EverFlex treatment: special thermal treatment stabilizes the core strands and improves consistency; offers excellent grip and consistent handling over time

Go for the summit! ALTITUDE is a lightweight harness with a simple design that allows you to don the harness without taking off your skis or crampons. It’s the ideal companion for ski touring or mountaineering. Two gear loops allow you to carry all the gear you need for excursions in the mountains. Designed for mountaineering and ski touring: Can be donned with both feet on the ground while wearing skis or crampons DOUBLEBACK LIGHT buckle and fastening strap are easy to operate, even with gloves Comfortable to wear when walking or hanging Lightweight and compact: Only 150 g Compact when stored in the pouch Extremely thin and flexible waistbelt and leg loops with WIREFRAME Technology: HMPE (high-modulus polyethylene) strands used in the waistbelt and leg loops provide optimal load distribution without the use of foam and and the low weight and comfort of the harness make it almost imperceptible Simple design and capacity to carry gear: Streamlined design Single tie-in point Two gear loops for carrying and organizing gear Retainers with silicone interior on each leg loop, for carrying an ice screw Material(s): Nylon monofilament, polyester, high-modulus polyethylene, aluminum Certification(s): CE EN 12277 type C, UIAA Harness comes in a protective carry bag

With a headband designed to be worn with a ponytail, the BOREA helmet is ideal for all your adventures! The durable and protective design is great for climbing, via ferrata, canyoning, and caving. The thick shell provides optimal resistance against impacts and scuffs. The design provides greater coverage for enhanced head protection, and is compact and ventilated for maximum comfort. Designed for women:- Smooth lines for a feminine design- Specifically sized for women (52/58 cm)- OMEGA headband with pronounced notch for wearing the helmet with a ponytail; the headband folds into the shell for easy storage and transport Designed for optimal protection against side, front, and rear impacts:- Designed in accordance with Petzl’s TOP AND SIDE PROTECTION label- Lower in the rear, the design provides greater coverage for enhanced protection Durable and versatile:- Hard outer shell is impact- and scratch-resistant for optimal durability- Hybrid construction with thick ABS shell, EPP foam liner, and EPS foam liner makes it compact on the head- Stable and comfortable fit, with foam liners on the entire inner shell- Suitable for climbing, mountaineering, caving, via ferrata, and canyoning- Four clips for headlamp attachment SPECIFICATIONS Material(s): ABS shell, expanded polypropylene (EPP) liner, expanded polystyrene (EPS) liner, polyester webbing Certification(s): CE EN 12492, UKCA, UIAA One size

A durable and protective helmet for all of your adventures! BOREO is great for climbing, via ferrata, canyoning, and caving. The thick shell provides optimal resistance against impacts and scuffs. The design provides greater coverage for enhanced head protection, and is compact and ventilated for maximum comfort. Durable: Hard outer shell is impact- and scratch-resistant for optimal durability Hybrid construction with thick ABS shell, EPP foam liner, and EPS foam liner makes it compact on the head Soft headband conforms well to the shape of the head and folds into the shell for storage and transportation Designed for optimal protection against side, front, and rear impacts: Designed in accordance with Petzl’s TOP AND SIDE PROTECTION label Lower in the rear, the design provides greater coverage for enhanced protection Stable and comfortable fit, with foam liners on the entire inner shell Versatile, for a variety of activities: Suitable for climbing, mountaineering, caving, via ferrata, and canyoning Four clips for headlamp attachment SPECIFICATIONS Material(s): ABS shell, expanded polypropylene (EPP) liner, expanded polystyrene (EPS) liner, polyester webbing Certification(s): CE EN 12492, UKCA, UIAA

The ERGONOMIC ice axe is designed for steep ice and dry tooling. The sharp angle of the handle is ideal for prolonged hanging and increases power when pulling. The double handle offers multiple grip modes and stable hand switching. Great on rock or ice, the DRY pick allows inverted positions and the weights make it easier to slot the pick into cracks. Featuring a minimalist hammer, the head is protected and allows the user to hammer a piton back in. It is entirely modular and can be configured according to the terrain. Comfortable grip, designed for highly technical climbing:- Double handle (high and low) offers multiple grip modes and stable hand switching- Lower handle is sharply angled for more comfort when hanging and more power for extremely difficult sections, and the shape allows an open-handed grip, limiting fatigue and optimizing rests- Upper handle is overmolded and bi-material, offering excellent grip and insulation from the cold- Hydroformed shaft provides optimal grip in the middle of the shaft Efficient placement, hooking, and wedging on different types of terrain:- Perfect shape and balance of the ice axe provide an exceptional swing- The curve under the head makes hooking easier- DRY pick is tapered at the tip (3.3 mm) and versatile across a variety of terrain: rock, snow, and ice; the 4 mm thickness of the pick makes it stronger when slotted and torqued and the toothed edge stabilizes inverted positions- Inertia and striking quality are improved with the MASSELOTTES weights- The shape of the weights is optimized for slotting the pick in cracks The ALPEN ADAPT system makes it completely modular:- Entirely modular head allows the technical aspects of the ice axe to be adjusted- Interchangeable with ICE, PUR'ICE, DRY, and PUR'DRY picks to adapt to different terrain objectives (snow, ice, or mixed)- Adze and hammer are interchangeable- Sold with MINI MARTEAU, to protect the head and allow the user to hammer a piton back in- Without accessories, the ice axe is lighter for dry tooling (only 550 g)- GRIPREST ERGONOMIC handrest is overmolded and adjustable to three positions to adapt to different hand sizes, even while wearing gloves Material(s): Aluminum, steel, glass fiber reinforced plastic Certification(s): CE, UIAA Sold with DRY pick, MASSELOTTES, MINI MARTEAU, and GRIPREST ERGONOMIC handrest

The lightest Petzl harness! FLY is a minimalist harness specifically designed for technical mountaineering and ski mountaineering. Allowing you to don the harness without removing your skis or crampons, it’s a practical solution. It’s also modular, with removable waistbelt and leg loop padding, so you can adapt the level of comfort and weight. Multiple gear loops and ice screw retainers allow you to keep your gear within reach. Extremely lightweight, for mountaineers and the most demanding skiers: Designed for technical mountaineering and ski mountaineering Can be donned with both feet on the ground while wearing skis or crampons Only 100 g (size M) with comfort foam removed, and 130 g with foam; the extremely low weight and body-hugging fit offer complete freedom of movement, making the harness feel almost imperceptible Innovative buckle-free construction (Petzl patent): a sliding toggle lock replaces the metal buckle for quick and easy waistbelt adjustment and the leg loops are adjusted with a girth hitch Slim design Minimalist pouch allows the harness to be compressed, freeing up space in your pack Comfort options: FUSEFRAME Technology with removable foam, for adapting the comfort level of the harness to the activity; the foam can be easily removed, making the harness even lighter Comfort foam optimally distributes the load to make hanging in the harness more comfortable Technical and durable: Two gear loops and four additional loops to organize and carry gear required for technical outings Retainer with silicone interior on each leg loop, for holding an ice screw Attachment points, webbing and gear loops reinforced with high-modulus polyethylene (HMPE), for greater resistance to abrasion and rubbing Material(s): High-modulus polyethylene, polyester, nylon Certification(s): CE EN 12277 type C, UIAA Harness comes in a protective carry bag Also comes with minimalist pouch for stowing the harness when used without foam

The adjustable FOOTAPE foot loop is used with an ASCENSION or BASIC rope clamp for rope ascents. A height-adjustable elastic keeps the foot in the loop, regardless of shoe type. Attaches to an ASCENSION or BASIC rope clamp for rope ascents Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into Elastic keeps a foot in the loop. It is adjustable in length, so it works with any type of shoe and stores easily when not in use DoubleBack buckle easily and quickly adjusts the length of foot loop SPECIFICATIONS Material(s): nylon, steel, aluminum Weight: 65 g

The adjustable FOOTCORD foot loop is used with an ASCENSION or BASIC rope clamp for rope ascents. Its 100 % Dyneema® construction increases durability. A height-adjustable elastic keeps the foot in the loop, regardless of shoe type. Details: Attaches to an ASCENSION or BASIC rope clamp for rope ascents 100 % Dyneema® for increased durability Elastic keeps foot in loop. It is adjustable in length, so it works with any type of shoe and stores easily when not in use. Plate for adjusting foot loop length Specifications: Material(s): Dyneema®, aluminum Weight: 40 g

Ultra-light at only 280 g, the GULLY ice axe is designed for technical mountaineering and steep skiing. Its tapered banana-shaped pick and the TRIGREST handrest (adjustable without a tool) ensure the performance required on technical sections. Ultra-light ice axe: 280 g Very technical and efficient: Ice axe with steelhead and banana-shaped pick that is tapered to 3 mm for efficient penetration and easy unhooking Minimalist adze and hammer for cleaning holds or hammering a piton back in The TRIGREST handrest allows the position of the hand or the index finger to be adjusted into climbing mode quickly and without tools Addition of weights (optional) improves anchoring quality in very cold ice Compact: Only 45 cm The bevelled spike makes it easy to carry the ice axe in a pack without damage to the bag

For those who wish to improve their climbing skills, the KIT CORAX GRIGRI Sm’D includes a versatile and fully adjustable CORAX harness, a GRIGRI belay system with assisted blocking, and an Sm’D carabiner with TRIACT-LOCK locking system. Ideal kit for evolving climbers:- a CORAX harness (gray)- a GRIGRI belay device with assisted blocking (gray)- an Sm’D carabiner with TRIACT-LOCK locking systemVersatile and fully adjustable CORAX harness:- comfortable, durable construction- waistbelt and leg loops are adjustable, to adapt to summer and winter activities GRIGRI belay device with assisted blocking:- easier belaying, thanks to cam-assisted blocking- exceptional convenience when lowering SPECIFICATIONS Certification(s): - CORAX harness: CE EN 12277 type C, UIAA - GRIGRI belay device: CE EN 15151-1, UIAA - Sm’D TRIACT-LOCK carabiner: CE EN 12275, UIAA

CORAX LT is a versatile climbing harness. Designed and manufactured by Petzl, it benefits from the brand’s expertise and reputation and is a comfortable harness while belaying or hanging. Four gear loops provide sufficient space for the required gear (quickdraws, nuts, or other equipment). The quality of materials make it highly durable. Available in five sizes for a variety of options. Petzl quality and expertise:- designed by Petzl in France and manufactured by Petzl- quality control throughout the production process, each Petzl harness undergoes systematic quality inspection of all its structural components- high-durability exterior fabric for better abrasion resistance- highly durable tie-in points with polyester reinforcement- steel DOUBLEBACK buckle allows easy adjustment for the entire life of the harness Comfortable:- ideal pressure distribution across the waistbelt and leg loops maximizes comfort while belaying or hanging- elasticized leg loop straps and flexible connection straps allow maximum mobility- high-quality foam provides comfort and excellent pressure distribution over time (FRAME Technology construction)- durable and soft interior that enhances comfort Ready to carry and organize gear:- two front gear loops are rigid and angled to bring the gear forward for easy clipping and unclipping of quickdraws- two flexible rear gear loops allow a backpack to be worn- rear accessory loop for chalk bag, shoes, quick link, trail line, or other gear- capable of racking ice screws, tools such as hammers, and other gear with the addition of a CARITOOL EVO tool holder Material(s): high-modulus polyester webbing, closed-cell foam Certification(s): CE EN 12277 type C, UIAA

Designed for climbing, mountaineering and ski touring, the METEOR helmet is lightweight and low profile, with excellent ventilation, making it comfortable for both summer and winter. The design provides reinforced protection to the top and circumference of the head. METEOR is the first CE-certified ski touring helmet. Optimal integration points for ski goggles or visors, making it a thoughtfully styled helmet that is optimized for ski touring. This helmet does not meet the requirements of the EN 1077 standard for alpine ski helmets. Lightweight, low profile, ventilated helmet:- only 240 g- the low-profile design of the helmet achieved using In-Mold construction with an expanded polystyrene (EPS) foam liner injected inside a lightweight polycarbonate shell- large vents, offer excellent airflow- quality finishing and a sleek design Enhanced protection:- designed in accordance with Petzl's TOP AND SIDE PROTECTION label- designed for optimal protection against side, front and rear impacts Suited for ski touring:- first CE-certified ski touring helmet- optimal ventilation on both the ascent and descent. The helmet can be worn comfortably from the beginning to the end of an outing- front of the helmet is specifically designed for integration of ski goggles- the rear elastic band is compatible with ski goggle headbands- semi-rigid headband can be adjusted easily, even with gloves on- two clips in front with a rear elastic band for securing a headlamp to the helmet- compatible with VIZION and SKREEN eye shields NOTE: THIS HELMET DOES NOT MEET THE REQUIREMENTS OF THE EN 1077 STANDARD FOR ALPINE SKIING HELMETS.

SOLD Individually - You must order a quantity of 2 if you want a set. The NOMIC ice axe sets the standard for ice climbing. Perfectly balanced, equipped with weights, it offers an exceptional swing. The PUR'ICE pick provides efficient placement in any type of ice. The shape of the ice axe and the double handle offer multiple grip modes, as well as stable hand switching. The grip is comfortable, thanks to the ergonomics of the handle and to the adjustable GRIPREST handrest. Featuring a minimalist hammer, the head is protected and allows the user to hammer a piton back in. Entirely modular, the ice axe can be optimized for the terrain. Efficient placement on any type of ice:- Perfect shape and balance of the ice axe provide an exceptional swing- Facilitated hooking, thanks to the curve under the head- PUR'ICE pick is tapered at the tip (3 mm), offering excellent penetration in any type of ice, including the very hardest. It is serrated on the upper side to offer a stable support when turned upside-down- Inertia and striking quality are optimized, thanks to the MASSELOTTE weight Comfortable grip, designed for technical ice climbing:- Multiple grip modes and stable hand switching, thanks to the double handle (high and low)- Lower handle is offset to protect the hand from contact with the ice and to provide more comfort when suspended- Upper handle is over-molded and bi-material, offering excellent grip and insulation from the cold- Hydroformed shaft for optimal grip in the middle of the shaft Modular construction:- Entirely modular head allows the technical aspects of the ice axe to be adjusted- Compatible with Petzl accessories: ICE, DRY, PUR'DRY, PANNE, MARTEAU- Sold with MINI MARTEAU, to protect the head and allow the user to hammer a piton back in- Without accessories, the ice axe is lighter, for dry tooling (only 500 g)- GRIPREST NOMIC handrest is overmolded and adjustable to three positions, to adapt to all hand sizes, even while wearing gloves. The lower part has a serrated stainless steel point that improves support when used in piolet-canne mode- Connection hole is compatible with V-LINK elasticated loss-prevention webbing

The lightweight OK carabiner is made of aluminum. It has an oval shape that allows the optimal loading of devices with a wide cross-section, such as pulleys, rope clamps and mobile fall arresters. Its fluid interior design and Keylock system facilitate handling. OK can be connected to the CAPTIV bar to favour positioning of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device. Symmetrical oval shape allows optimal loading of devices with a wide cross-section, such as pulleys, rope clamps and mobile fall arresters Aluminum carabiner whose lightweight reduces the weight of equipment the worker at height needs to carry May be used with a CAPTIV positioning bar to favour loading of the carabiner along the major axis, to keep it integrated with the device, and to limit the risk of it flipping Easier handling: Fluid interior design limits the risk of having a catch point and facilitates rotation of the carabiner Keylock system to avoid any involuntary snagging of the carabiner H cross-section: Ensures an optimal strength/weight ratio Protects markings from abrasion The symmetric shape is ideal for use with belay devices, to maximize efficiency no matter which end is closest to the device. The oval shape works great with pulleys Keylock system

OXAN is a high-strength steel carabiner designed for use in difficult environments. The oval, symmetrical shape allows optimal loading of the carabiner when setting up anchors or connecting to metal structures. It is available in two locking systems: automatic TRIACT-LOCK system or manual SCREW-LOCK system. OXAN TRIACT-LOCK is available in European or international versions. OXAN can be connected to the CAPTIV bar to favor positioning of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device. High-strength steel carabiner for use in harsh environments, particularly suitable for setting up anchors or for connecting to metal structures Oval symmetrical shape allows optimal positioning of the carabiner May be used with a CAPTIV positioning bar to favor loading of the carabiner along the major axis, to keep it integrated with the device, and to limit the risk of it flipping Easier handling:- fluid interior design limits the risk of having a catch point and facilitates rotation of the carabiner- Keylock system to avoid any involuntary snagging of the carabiner H cross-section:- ensures an optimal strength/weight ratio- protects markings from abrasion Two locking systems available:- TRIACT-LOCK: automatic locking with triple-action gate opening- SCREW-LOCK: the manual screw-lock with red band provides a visual warning when the carabiner is unlocked Available in European or international versions Also available in black