Petzl

SOLD Individually - You must order a quantity of 2 if you want a set. QUARK is a versatile ice axe designed for technical mountaineering and for ice climbing. Its balance and its ICE pick allow solid placements on any type of ice. The TRIGREST and GRIPREST handrests make it easy to handle and comfortable in any situation. They provide more efficient handle grip for difficult sections. Entirely modular, the QUARK ice axe adapts easily to technical, varied terrain: snow couloirs, gullies, north faces, icefalls... Versatile ice axe:- Shaft curved below the head and GRIPREST QUARK handrest at the bottom of the shaft to protect the hands on ice climbs- Shaft has a steel spike and is straight enough for use in piolet-canne mode- Shaft is hydroformed for optimal grip in the middle of the shaft, for snow couloirs- Over-molded, bi-material handle provides good grip while insulating from the cold- TRIGREST QUARK and GRIPREST QUARK handrests strengthen the grip on difficult sections- 550 g with PANNE or MARTEAU Efficient placement on any type of ice- ICE pick is tapered at the tip (3.3 mm) and versatile across all terrain: snow, ice and mixed- Compatible with MASSELOTTE weights to modify the balance and improve the inertia of the ice axe Modular construction:- Entirely modular head allows the technical aspects of the ice axe to be adjusted- Compatible with Petzl accessories: PUR'ICE, MINI MARTEAU, MASSELOTTES...- TRIGREST QUARK handrest is height adjustable without tools- GRIPREST QUARK handrest folds in easily for planting the ice axe in snow- Connection hole is compatible with V-LINK elasticated loss-prevention webbing- Only 465 g, not including accessories

The lightweight REVERSO is a multi-functional belay/rappel device designed for cragging, multi-pitch climbing and mountaineering. Reverso mode provides assisted-braking while belaying one or two seconding climbers from the top of a pitch. It accommodates most rope diameters: single rope 8.5 to 10.5 mm, half ropes 7.1 to 9.2 mm and twin ropes 6.9 to 9.2 mm. The specific design of the rope slots allows the rope to glide smoothly and reduces wear. Multipurpose and easy to use:- classic belay technique with both hands on the rope- ropes glide smoothly through the device- can be used for rappels- Reverso mode for belaying one or two seconds; commonly used on multi-pitch climbs- independent and simultaneous belaying of two seconds in Reverso mode- while belaying in Reverso mode, a carabiner placed in the release hole allows the belayer to give slack when the device is under tension- rope installation diagrams for belaying and Reverso mode are engraved on the device Adapted to a broad range of rope diameters:- V-shaped friction grooves enable controlled braking- compatible with dynamic single ropes 8.5 to 10.5 mm (11 mm possible, depending on the rope's suppleness)- compatible with dynamic half ropes 7.1 to 9.2 mm- compatible with dynamic twin ropes 6.9 to 9.2 mm Durable and lightweight:- the rounded design of the rope slots limits wear and extends the life of the device- compact and lightweight: only 57 g Certification(s): EN 15151-2, UIAA

The SIROCCO is designed to respond to the needs of climbers and mountaineers for reduced weight and for protection. Its head-covering shape, lower in the rear, offers reinforced protection. Optimized volume on the head, along with excellent ventilation, provide maximum comfort. Ultra-light design: only 170 g hybrid construction with a shell in EPP (expanded polypropylene) foam and rigid crown injected with EPS (expanded polystyrene) foam. Head-covering design for optimal protection against lateral and rear impact. Maximum comfort in action: wide holes, for excellent ventilation. completely adjustable, thanks to the adjustable headband and chinstrap. magnetic buckle facilitates fastening the chinstrap (Petzl patent). compatible with the VIZION eye shield. two hooks and rear elastic for attaching a headlamp. It comes with a protective storage bag and spare foam.

For skilled climbers and mountaineers! SITTA is lightweight without compromising comfort. It's also very compact when stored in your backpack. The extremely thin and flexible waistbelt keeps your movement completely unhindered, whether you’re rock climbing or mountaineering. Four gear loops allow you to carry all the gear you need to climb rock or ice. With this harness, you can power through multi-day excursions: the reinforced tie-in points are designed to provide long-lasting resistance to rope friction. Remarkably lightweight, mobile, and comfortable: Extremely thin and flexible waistbelt and leg loops with WIREFRAME Technology: HMPE (high-modulus polyethylene) strands used in the waistbelt and leg loops provide optimal load distribution without the use of foam and the extreme lightness and comfort of the harness make it practically unnoticeable when worn Very compact, freeing up room in your pack The elasticized fixed leg loops and supple leg loop bridge give you total freedom of movement Waistbelt equipped with a DOUBLEBACK HD buckle in forged aluminum, offering good grip and fluid glide of the webbing for easy and quick adjustment Capacity to carry a large quantity of gear: Two very large, rigid equipment loops in front for racking a lot of gear and to easily clip and unclip tools; mobile separators optimize organization and quick access to quickdraws, nuts, and other gear Two flexible rear gear loops, angled to bring gear to the front and comfortable when carrying a backpack Two slots for CARITOOL tool holder Rear loop for trail line or for carrying belay station gear Enhanced durability: Bonded construction in the waistbelt avoids pressure points and provides optimal wear resistance The lack of through stitching eliminates chafe and friction zones in the waistbelt Durable, abrasion-resistant exterior fabric Reinforced tie-in points in high-modulus polyethylene (HMPE) for improved resistance to wear from rope friction

Sm’D is a D-shaped locking carabiner that is lightweight and compact and can be used in numerous situations; it is easy to manipulate, even when wearing gloves, and is available in three locking system versions. Great versatility:- D shape is functional regardless of orientation, meeting multiple uses: attachment of a belay system, a pulley, or on the end of a lanyard...- Compact and very lightweight Good handling and ergonomics:- D shape for good handling- H-shaped cross-section contributes to better grip when wearing gloves- Keylock system, to avoid any involuntary snagging of the carabiner- Hole allows a TIBLOC or a MICRO TRAXION to be connected to the carabiner with a cord, making these devices loss-proof TWIST-LOCK: specific use when quick opening is key (e.g. at the end of a lanyard) and when connecting a GRIGRI to the harness

Built specifically for women, the CORAX LT WOMEN is a versatile climbing harness. Designed and manufactured by Petzl, it benefits from the brand’s expertise and reputation and is a comfortable harness while belaying or hanging. Four gear loops provide sufficient space for the required gear (quickdraws, nuts, or other equipment). The quality of materials make it highly durable. Available in five sizes for a variety of options. Petzl quality and expertise:- designed by Petzl in France and manufactured by Petzl- quality control throughout the production process, each Petzl harness undergoes systematic quality inspection of all its structural components- high-durability exterior fabric for better abrasion resistance- highly durable tie-in points with polyester reinforcement- steel DOUBLEBACK buckle allows easy adjustment for the entire life of the harness Comfortable:- designed specifically for women, including an adapted rise and waistbelt-to-leg-loop ratio for a better fit- ideal pressure distribution across the waistbelt and leg loops maximizes comfort while belaying or hanging- elasticized leg loop straps and flexible connection straps allow maximum mobility- high-quality foam provides comfort and excellent pressure distribution over time (FRAME Technology construction)- durable and soft interior that enhances comfort Ready to carry and organize gear:- two front gear loops are rigid and angled to bring the gear forward for easy clipping and unclipping of quickdraws- two flexible rear gear loops allow a backpack to be worn- rear accessory loop for chalk bag, shoes, quick link, trail line, or other gear- capable of racking ice screws, tools such as hammers, and other gear with the addition of a CARITOOL EVO tool holder Material(s): high-modulus polyester webbing, closed-cell foam

When climbing, mountaineering, or ski touring, the METEORA helmet is the right choice! With a headband adapted to be worn with a ponytail, it offers efficient protection for these three sports. Its lightweight, compact design and excellent ventilation make for a comfortable helmet in any season. The design provides greater coverage and enhanced head protection. Specifically designed to be worn with ski goggles, it is CE certified for ski touring and is adapted to be worn during this activity (please note that this helmet does not meet the requirements of the EN 1077 standard for alpine skiing helmets). • Lightweight and comfortable design for women: specifically sized for women (52/58 cm) OMEGA easy-to-adjust, semi-rigid headband with pronounced notch for wearing the helmet with a ponytail quality finish and sleek design only 225 g low-profile design of the helmet achieved using In-Mold construction with an expanded polystyrene (EPS) foam liner injected inside a lightweight polycarbonate shell large vents offer excellent air flow Enhanced protection: designed in accordance with Petzl’s TOP AND SIDE PROTECTION label designed for optimal protection against side, front and rear impacts Suited for ski touring: first CE-certified ski touring helmet optimal ventilation on both the ascent and descent, the helmet can be worn comfortably from the beginning to the end of an outing front of helmet is specifically designed for use with ski goggles rear elastic band is compatible with ski goggle headbands semi-rigid headband can be easily adjusted, even with gloves on two clips in front and a rear elastic band for securing a headlamp to the helmet NOTE: This helmet does not meet the requirements of the EN 1077 standard for alpine skiing helmets.