Edelrid

Special accessory cord made from a combination of high-strength polyamide and aramid. Of particular note is that this accessory cord has a dynamic reserve and withstands two standard falls in accordance with the dynamic twin-rope test established in EN 892. Thanks to the aramid fibres in its sheath, the rope has greater cut resistance, e.g. when subjected to loads over sharp edges. SPECIFICATIONS Withstands two required standard falls for dynamic twin rope tests according to EN 892 Suitable for hauling equipment or abseiling, thanks to the low elongation values 3D lap coiling enables instant use without tangles Special accessory cord made of a combination of high-strength polyamide and aramid Increased cut resistance under load, e.g. over sharp edges Durably water repellent and dirt resistant Diameter: 6 mm Weight per meter: 29 g/m Minimum breaking strength: 10 kN Certification: EN 564 Country of origin: Germany Material: Polyamid/Aramid Sharp edge approved: Yes Rope Type: Cord Impregnation: Yes UIAA: Yes

The Edelrid Boa Eco is a robust, all-round rope that's made of high-quality yarns left over from production, giving it a unique look but the same handling and strength as other Edelrid ropes. Thermo Shield treatment employs a heat process to stabilize individual yarns, ensuring the rope stays supple throughout its working lifetime. Kernmantle design features a stretchy core protected by a durable outer sheath which combine for strength and good handling. Outstanding price-to-performance ratio. The Edelrid Boa Eco 9.8mm x 60m Non-Dry Rope meets UIAA tests for falls, impact force and elongation. Bluesign approved. Colours vary.

Small, robust screwgate biner with steel insert at the apex. Prevents premature wear and burrs or sharp edges. Ideal for personal protection use, e.g. clipping into a belay anchor. Keylock closure mechanism for optimum handling when clipping and unclipping H-profile construction ensures best possible use of material and minimal weight Steel insert prevents premature wear from rope friction or bolt hangers

The most versatile ever belay device. The Giga Jul is a standard and assisted braking tuber in one. The assisted braking function which supports the braking force can be activated or disabled by an intelligent mechanism. For situation-dependent belaying and abseiling, especially in alpine terrain. Review: Edelrid Giga Jul Belay Device by Black Sheep Adventure Sports Small eyelet for releasing unit with a carabiner when bringing up your partner Suitable for 7.1 - 10.0 mm double and twin ropes Intelligent hybrid design: body made of ultra-light aluminum, areas susceptible to abrasion made of robust stainless steel Guide mode: simple and rapid abseiling and bringing up seconds plus comfortable belaying from a belay station as a doubled rope Assisted braking guide mode: brake boost for catching falls in leader mode Rope can be paid out faster in assisted braking guide mode by holding the device in the “open” position with the thumb CE marking: CE 0123

Innovative, robust HMS carabiner with steel insert at the apex (rope basket) and an internal spring bar to prevent it from twisting. Ideal for use with EDELRID belay devices. Steel insert prevents premature wear from rope friction or bolt hangers. Keylock closure system for optimal handling when clipping and unclipping. H-profile construction ensures best possible use of material and minimal weight. Eco colour version: Particularly sustainable due to the fact that anodising is not applied

Use the versatile Edelrid Mega Jul Belay Device for belaying lead climbers, belaying a second or third follower from the anchor, lowering top-rope climbers from the anchor, rappelling, or abseiling. Geometrically assisted breaking design promotes safer belaying, without sacrificing weight and bulk. The large steel loop on top attaches to anchors so the device can be set up for guide mode. There is a small eyelet that allows a second to be lowered from a top belay. FEATURES High braking performance assists the belayer with leader falls Small eyelet for releasing unit with a carabiner when bringing up your partner For belaying a leader or bringing up 2 seconds, also suitable for abseiling Rope can be paid out faster to a leader by holding device in the ‘open’ position with the thumb Robust solid stainless steel construction Suitable for 7.9–10.5mm ropes Weight: 65g Country of origin: Germany Material: Steel Manual: Yes

The perfect all-rounder for climbing, mountaineering, and use on via ferratas. Adjustable leg loops and an easy-to-center tie-in point enable the harness to be quickly and conveniently fitted to size. Adjustable leg loops for optimum fit and full flexibility Small pouch on harness to accommodate an RFID tag Moveable foam waist padding allows the tie-in point and the four fixed gear loops to be centered and aligned Slide Block buckles for a comfortable and secure harness fit 4 symmetrical, high-strength gear loops, 2 attachment options for ice screw clips, and a chalk bag loop Made of bluesign®-certified materials

A compact, ultra-light belay and abseil device for half ropes and twin ropes. It is the only suitable device for use with Edelrid's Flycatcher 6.9 mm. For belaying a leader or bringing up 2 seconds, also suitable for abseiling. Robust solid stainless steel construction. High braking performance assists the belayer with leader falls. Small eyelet for releasing unit with a carabiner when bringing up your partner. Rope can be paid out faster to a leader by holding the device in the “open” position with the thumb.

The 3 R's - Reduce, Reuse, Recycle. Edelrid took that to heart and created the Neo 3R, the first climbing rope made of 50% recycled ropes. By using recycled fibres, the Neo minimizes the carbon footprint in the manufacturing process, producing nearly 80% less CO2 emissions than a non-recycled rope. The 9.8mm thickness is adequately beefy for sport projecting and top roping, with the same safety and performance standards of any non-recycled rope. Sheath and core include recycled yarns Thermo Shield treatment gives it excellent handling properties, a supple feel and an impressive strength rating 3D lap coiled so you can use it straight away without kinking or tangling Rating: Single Non-dry Bluesign certified Made in Germany SPECIFICATIONS Weight: [70m] 4.27kg  Dynamic Elongation: 37% Static Elongation: 8.3% Impact Force: 8.6kN Linear Weight: 61g/m Diameter: 9.8mm UIAA fall rating: 5

Pure carabiner with a locking slide gate –The locking slide gate helps minimize accidental gate opening and works well for traverses or wandering routes. Locking slide-gate mechanism minimizes risk of accidental gate opening Easy-operation slide-gate mechanism for fast clipping H-profile construction ensures best possible use of material and minimal weight

An all-round harness specially tailored to the female anatomy with adjustable leg loops and an easy-to-center tie-in point. Suitable for all vertical activities. Adjustable leg loops for optimum fit and full flexibility Longer leg loop bridge enables optimal positioning above the hip bones at all times Small pouch on harness to accommodate an RFID tag Moveable foam waist padding allows the tie-in point and the four fixed gear loops to be centered and aligned Slide Block buckles for a comfortable and secure harness fit 4 symmetrical, high-strength gear loops, 2 attachment options for ice screw clips, and a chalk bag loop Made of bluesign®-certified materials