Products

The Choucas Light harness is probably the world's lightest harness you can put on with feet on ground and with independant opening leg loops. Weighing a mere 84 g (size S), it is lighter than a smartphone and, once folded, as compact as a headlamp. Still it features what you expect for a ski or alpinism harness, including two gear loops, and our iconic screw keepers on our openable leg loops. The secret for such lightness? Simplicity: two convenient tying loops instead of an opening metal buckle. An on the leg loops a handy, fast and secure opening system. The result is a harness being both ultralight and comfortable, whether when hanging for an occasional rappel or on the move. Never was an alpine and ski harness so light and convenient, but we struck this challenging balance with the Choucas Light harness. Can be put on/off with skis/crampons on, feet on ground Tying loops, with adjustable clip backup Independant leg loops opening system with secured aluminum buckles Two gear loops Two ice screw keepers Dimensions waist / leg: S: (70-83cm/45-55cm) / (27.5-32.6'' / 17.7-21.6'') M: (80-93cm/50-60cm) / (31.5-36.6'' / 19.7-23.6'') L: (90-103cm/55-65cm) / (35.4-40.5'' / 21.6-25.6'') Designed in Chamonix Mont-Blanc HOW TO CHOOSE THE RIGHT SIZE FOR YOU? The Choucas Light fits a bit small for its size. Also, it can be put over the pants or under them (with the tying loops left outside the pants). Please choose your size accordingly. In doubt or if your waist/legs dimensions are in between two sizes, we recommend you to choose the bigger size.

These are shapes which CNC's excel with. The holds are shaped to be as ergonomic as possible whilst testing a particular grip type. 2 finger Pockets: 1 pad depth at 45 degrees but 2 pad depth when placed on a vertical wall. 130mm x 100mm with a 40mm depth. They are comfy ergonomic holds which will be testing on a 45˚ or steeper board but perfect for training the grip type on.

These are shapes which CNC holds excel with. The holds are shaped to be as ergonomic as possible whilst testing a particular grip type.

Most pitons rely on compression of the metal and leverage from directional pull for their holding power. The U shape of the shaft on the Corner piton adds an additional holding force by creating spring tension when the piton is driven into a crack proportionately smaller than its width. Specifications: Material: Hardened Steel Intended Use: Granite Weight: #1 – 55 g, 1.9 oz #2 – 64 g, 2.3 oz Length (Blade): #1 – 70 mm, 2.8 in #2 – 75 mm, 3.0 in Thickness: #1 – 12 mm #2 – 16 mm

The lightest ice axe in the world! The clean design provides amazing performance especially considering how little it weighs. Perfect for glacier travel, ski mountaineering and adventure racing. The 7075-T6 aluminum alloy head and shaft meet all CE and UIAA requirements for strength and durability. However, the Corsa is not recommended for ice climbing, rugged mixed terrain, or for intense step chipping. The lightest ice axe in the world! Forged aluminum pick and adze. Ideal for snow travel and self arrest. Can be used as an anchor for glacier rescue and traversing cornices. Nylon spike plug on 60 and 70cm lengths keeps ice out of the shaft. Optional sliding leash (1305) easily attaches to the shaft.

The Corsa Nanotech is the most advanced mountaineering ice axe on the market. It merges the hyperlight properties of aluminum construction with a Sandvik Nanoflex steel reinforced tip and spike for a solid grip on hard snow and ice. The steel components dramatically increase the performance of these critical points without significantly increasing the weight of the axe. The single-curve shaft provides extra clearance without interfering with walking or plunging performance. A lightweight nylon spike plug keeps snow out of the shaft. The grip is machined for good handling and a small slot in the head allows for seamless integration with the Corsa leash (sold separately). Sandvik Nanoflex® is an innovative patented steel alloy that is 70% stronger and 20% harder than normal steel which allows for a significant reduction in the amount of metal used, thereby decreasing weight while maintaining strength. A technical version of the Corsa with a single-curve shaft and Sandvik Nanoflex steel reinforced tip and spike for a solid grip on hard snow and ice Designed for glacier travel and ski mountaineering Nylon spike plug keeps snow out of the shaft Small head slot for seamless integration with the Corsa leash (sold separately) Machined grip for good handling WEIGHT 50 cm: 225 g, 7.9 oz 60 cm: 253 g, 8.9 oz SPECIFICATIONS Lengths (cm): 50, 60 Head: Fixed Pick Material: 7075 Aluminum/Nanoflex Shaft Material: 1.3 mm 7075 Alu Spike Material: Nanoflex Leash: Corsa (optional) Standards: CE EN 13089 Type 1

The Wide Boyz Crack Trainer with Soft Grip is a simple, lightweight, two piece adjustable crack system, for home use or training areas within climbing gyms. It can be used as a single unit for crack specific exercises and dialling in your technique or multiple units can be added together to do full boulder problems and circuits. The product comes in a flat packed style which is easily assembled and installed by the user. Soft Grip is provided with this product and can be installed within the assembly process, plus easily replaced at a later date if worn. Using Soft Grip will provide a grippy and comfortable crack feel. This option is good for Endurance and Power Endurance work outs, as well as working on technique. For a more difficult jamming surface purchase without Soft Grip. USAGE Use only with rock shoes Practice and train with a mixture of Wide Boyz tape (or crack gloves) and bare hands. Always stop using before hands and feet become sore SETTING The Crack trainer has two halves which you’re able to set at your desired width. Below are recommended Wide Boyz widths. (The dimensions below are just for guidance and you should set the Crack Trainer to coincide with the dimensions of your own hand/arm/leg/…head?) 1 – 1.5 inch = thin hand size 1.5 – 2 inch = tight hand size 2 – 2.5 inch = hand size 2.5 – 3.5 inch = baggy and cupped hand size 3.5 – 4 inch = fist size 4 – 5 inch = stacked hand size LEVEL AND ABILITY The Crack Trainer can be used for all abilities, from those just starting out wanting to purely practice technique, to those who’ve been jamming for years, but want to do some jam specific training exercises. Example training exercises can be found on the card provided with this product A range of different crack climbing techniques are demonstrated on our Youtube Channel. PACK CONTAINS 2 x Crack Trainer halves (24 Screw cups, 48 screws, 2 Base Plates, 4 Uprights, 2 Crack Walls, 4 End Caps, 2 Gripper Bars). 1 x Glue 1 x Assembly instruction card 1 x Training card Wide Boyz stickers MORE DETAILS Dimensions (31.69" × 7.28" × 4.13") Length 800mm Height 180mm Width 115mm All edges and features aside from the crack are rounded for comfort and can be held, stood on and used as other options, to help diversify the climbing and make exercises harder or easier.

Do you suffer from chronic neck pain from belaying? Are you tired of looking up all day at your climbing buddies? Would you like to look both goofy and cool at the same time? If you answered yes to any of the questions above then the Crush Vision belay glasses are perfect for you! These belay glasses are literally designed to watch people crush. By wearing these Crush Vision belay glasses you will be guaranteed to see epic sends, wicked whippers, sketchy run-outs, and all sorts of crushery! The Crush Vision belay glasses have the following features: All Metal Frame that can withstand the abuse from all day climbing adventures. 100% Glass Prisms that are both crystal clear and scratch resistant Lightweight and minimalist design that won’t slip off your face or completely obstruct your view. Includes a case with a clip that will fit right on your harness, a lanyard to wear them around your neck and a cleaning cloth! Note: every pair of glasses comes with a carrying case, a microfiber cleaning cloth, and a lanyard.

With its 372 grams, the Dragonfly 18L backpack has an unrivalled power-to-weight ratio. Minimalist, ultralight and comfortable, make this pack ideal for multi-pitch missions, it holds all your gear while staying ultralight thanks to its Aerolight suspension system, breathable straps and back ultralight fabric material. Very compact, you can stuff it in its zipped front pocket and store it in another bag. The chest strap and belt are fully removable for additional weight-savings. Its design allows for a hydration bladder and a helmet holder. In short, it's a sleek backpack for the most demanding climbers longing for lightness. Secure dual ice axe carry with laminated pick tunnel. Asymetical stretch pockets for on-the-go access. Low profile air-permeable shoulder straps Removable waist belt. Integrated rope carry system. Dual access accessory pocket with key clip Water resistant YKK external zip Removable high density Atilon frame sheet. Permanent, fluorocarbon-free weather shedding face coating. Hydration compatible Helmet carrier compatible. SPECIFICATIONS Materials: 210d High Tenacity Nylon ripstop main fabric - PFC free, Bluesign approved material Volume: 18L Dimensions: 51 x 24 x 20 cm Weight: 415 g / min 325 g stripped

The Dragonfly 26L is the perfect intermediate size with optimal lightness. Pockets are optimized for stretch and position to keep essentials accessible. Built with a new fit standard, Blue Ice uses a mesh based carry system with ultra-static mesh to provide breathability. The engineered foam shoulder transfers loads without deforming. Fabrics are weather shedding and combined with water resistant YKK zips. Secure dual ice axe carry with laminated pick tunnel. Asymmetrical stretch pockets for on-the-go access. Low profile air-permeable shoulder straps Removable waist belt. Integrated rope carry system. Dual access accessory pocket with key clip Water resistant YKK external zip Removable high density Atilon frame sheet. Permanent, fluorocarbon-free weather shedding face coating. Hydration compatible Helmet carrier compatible. New improved fit, one size only. Volume: 26L SPECIFICATIONS Dimensions: 54 x 25 x 20 cm Weight: 460 g / min 370 g stripped Note: Images included are of the 18L Dragonfly and have been included to show the colours.

Designed by Blue Ice athletes for Himalayan mountaineering expeditions, the Dragonfly 45L is a backpack for the most determined mountaineers. Its 45-liter volume can hold all your equipment whilst remaining comfortable thanks to its back panel and ultralight breathable straps, designed to free your movements. The chest strap and belt are fully removable. Its design allows for a hydration bladder and the addition of a helmet holder. Each accessory, every gram was slaved over, analyzed and debated to achieve the best weight-to-performance ratio. The result is the lightest alpine expedition backpack (656g) you can find in this volume, while remaining ultra-functional. • Quick opening drawcord system• Breathable mesh back panel & shoulder straps• 2 ice axe holders• Helmet holder compatible (sold separately)• Hydration bladder compatible• Rope holder• Removable side compression cords• Removable chest strap and padded waist belt• Material: 210D high-tenacity ripstop nylon 66• Volume: 45L• Dimensions: 60x30x21cm• Weight: 656g (473g) 

The Metolius Easy Aider is a revolutionary adjustable design that allows you to operate both the buckle and the carabiner without changing your grip. It is made from ¾" nylon webbing and has anodized CNC aluminum buckles for durability. The wide, comfortable foot stirrups buckle securely in place, making this the ultimate ascender sling! Easy Aiders are labeled and color-coded specifically for the right and left foot. For body weight only. Strength: 1.3 kN (300 lbf) Overall length: 94" (2388 mm) Colours: maroon (left), gray (right)

The Metolius Easy Daisy is a revolutionary adjustable daisy design that allows you to operate both the buckle and the carabiner without changing your grip. It is made from ¾" nylon webbing and has anodized CNC aluminum buckles for durability. For body weight only. Weight: 3.5 oz. (99 g) Strength: 1.3 kN (300 lbf) Overall length: 56" (1422 mm) Color: Blue or Yellow

In the Canadian Rockies, the never-ending buffet of steep ice is accompanied by unforgiving sub-zero temperatures, and the Black Diamond Enforcer is capable of handling both. By combining a waterproof and breathable GORE-TEX insert with 170-gram PrimaLoft Gold insulation on the back of hand and a fixed 190 g fleece lining, the Enforcer dishes out complete warmth and weather protection. The 4-way stretch shell at the fingers keeps the Enforcer dexterous and supple while climbing and the TPU knuckle patch protects against abrasion. A low-profile Hypalon wrist strap with a hook-and-loop closure was added for extra security and the long cuff cinches down to seal out spindrift. The Enforcer's ice tool specific pre-curved fit, articulated fingers and wrapped pinky construction provide comfort while climbing. 100% Waterproof and breathable Gore-Tex insert 170 g PrimaLoft Gold Insulation at back of hand Fixed 190 g fleece lining Low profile Hypalon wrist strap with hook-and-loop closure 4-way stretch shell at fingers Pertex Shield rip-stop shell Goat leather palm and palm patch with suede nose wipe Ice tool specific pre-curved fit and articulated fingers provide a comfortable, sure grip Ice tool specific wrapped pinky for precision grip and comfort in the pommel Size: XS-XL  

The ERGONOMIC ice axe is designed for steep ice and dry tooling. The sharp angle of the handle is ideal for prolonged hanging and increases power when pulling. The double handle offers multiple grip modes and stable hand switching. Great on rock or ice, the DRY pick allows inverted positions and the weights make it easier to slot the pick into cracks. Featuring a minimalist hammer, the head is protected and allows the user to hammer a piton back in. It is entirely modular and can be configured according to the terrain. Comfortable grip, designed for highly technical climbing:- Double handle (high and low) offers multiple grip modes and stable hand switching- Lower handle is sharply angled for more comfort when hanging and more power for extremely difficult sections, and the shape allows an open-handed grip, limiting fatigue and optimizing rests- Upper handle is overmolded and bi-material, offering excellent grip and insulation from the cold- Hydroformed shaft provides optimal grip in the middle of the shaft Efficient placement, hooking, and wedging on different types of terrain:- Perfect shape and balance of the ice axe provide an exceptional swing- The curve under the head makes hooking easier- DRY pick is tapered at the tip (3.3 mm) and versatile across a variety of terrain: rock, snow, and ice; the 4 mm thickness of the pick makes it stronger when slotted and torqued and the toothed edge stabilizes inverted positions- Inertia and striking quality are improved with the MASSELOTTES weights- The shape of the weights is optimized for slotting the pick in cracks The ALPEN ADAPT system makes it completely modular:- Entirely modular head allows the technical aspects of the ice axe to be adjusted- Interchangeable with ICE, PUR'ICE, DRY, and PUR'DRY picks to adapt to different terrain objectives (snow, ice, or mixed)- Adze and hammer are interchangeable- Sold with MINI MARTEAU, to protect the head and allow the user to hammer a piton back in- Without accessories, the ice axe is lighter for dry tooling (only 550 g)- GRIPREST ERGONOMIC handrest is overmolded and adjustable to three positions to adapt to different hand sizes, even while wearing gloves Material(s): Aluminum, steel, glass fiber reinforced plastic Certification(s): CE, UIAA Sold with DRY pick, MASSELOTTES, MINI MARTEAU, and GRIPREST ERGONOMIC handrest